What you're signing · five seats
Thirty-six months, or thirty-six chances to leave
The functional gap between these two products is smaller than the commercial one. Every notch below is a month you could walk away; the solid bar is a month you couldn't.
committed over a 24-month Joblogic term at five seats, before month one is worked
committed on OnPoint — the same five seats cost £55 a month and you can stop in any of them
Premium and Enterprise are priced on request, so the number above is their published Standard rate. If you need the higher tiers, the commitment conversation starts before you know the price.
Choose Joblogic if
You manage assets and compliance across many sites — facilities management, planned maintenance, air conditioning and chiller work — and you want AI job allocation and asset histories at that scale. It's built for that, and it asks for a commitment in return.
Choose OnPoint if
You're a gas or electrical firm that wants deep certificate work — 39 named types and validation before issue — without a two-to-three year commitment. £19 for the first seat, £9 for each after, billed monthly, everything included.
Where Joblogic is stronger · 7
Mostly at the top end of the market
Many sites, many assets, planned maintenance at scale. If that's your business, this list outweighs everything below it.
Where OnPoint is stronger · 8
On terms, on certificate depth, and on the smaller firm's week
An enterprise platform doesn't always reach down to a five-person round. These are the places it doesn't.
Price, and no contract
£19 for the first seat and £9 for each one after, against from £45 per user — £55 against £225 at five seats. Joblogic's rate is billed annually on contracts that typically run 24 to 36 months; OnPoint is billed monthly with no minimum term, so you can leave in any month. For a small firm the commitment is usually the bigger decision.
39 certificate types, published by name
18 gas, 20 electrical and hot water, all listed by name, plus a custom builder. Joblogic advertises “most major gas and electrical surveys” without publishing the range, so you'd need to confirm on a demo that the specific documents you issue are covered.
The validation engine
67 rules across Gas Safe procedure and BS 7671 that block an invalid certificate before it's issued — a GC number contradicting the manufacturer, an unsafe appliance with no Danger Do Not Use notice, an EICR marked unsatisfactory with no C1, C2 or FI, measured Zs above the maximum, CPC below Table 54.7. Each issue says what's wrong, why, and how to fix it. Not advertised on their site.
Everything on every plan, at a published price
Joblogic is tiered — Standard, Premium and Enterprise, with Premium and Enterprise priced on request, so you find out what the features you want cost after a sales conversation. On OnPoint every feature is on every plan from the first £19 seat, and the price is on the page.
AI on the certificate, not the rota
Appliance details read from a photo of the data plate with per-field confidence and a refusal to guess serial numbers, flue readings read from the analyser, spoken job reports turned into structured written ones, GC number and fault-code lookup. Joblogic's AI schedules jobs and summarises engineer notes — genuinely useful, aimed at a different problem.
Getting paid, and UK tax handling
Payment plans and instalments with saved cards, late-payment interest on configurable terms, a bank feed that matches payments automatically, and CIS deductions with the VAT domestic reverse charge on quotes and invoices. Not advertised on their site.
Customers booking themselves in
A public booking page with bookable services and durations, slot holds, a standby list and a gap filler for holes in the diary. Not advertised on their site.
Subcontracting, fleet, and getting started
A partner network with job offers, a subcontractor portal for progress and evidence, completion proof, payout tracking and a hashed frozen dispute evidence pack. A fleet register with DVLA vehicle lookup by registration. Several businesses from one login. And free migration help with no onboarding fee.
Price, by team size
Their published rate is the floor, not the quote
Joblogic Standard starts from £45 per user, billed annually. Premium and Enterprise are priced on request, so a real quote may be higher.
Joblogic prices from joblogic.com on 31 August 2026, ex VAT, from £45 per user billed annually; terms typically run 24–36 months. OnPoint is not VAT registered and has no minimum term, so its committed figure is £0. Check current pricing with each provider.
Side by side, as advertised
| Capability | OnPoint | Joblogic |
|---|---|---|
| Minimum term | None, monthly | 24–36 months typical, billed annually |
| Price, five seats | £55 | £225 Standard |
| Higher tiers | None — one plan | Premium and Enterprise, priced on request |
| Certificate range | 39 types, published by name | “Most major gas and electrical surveys”, range not published |
| Air conditioning & chiller certificates | Not supported | They win |
| Water hygiene | Legionella risk assessments only | They winFull certification |
| Asset management | Appliance register per property | They winMulti-site asset history |
| Planned preventative maintenance | Not supported | They win |
| Certificate validation engine | 67 rules, blocks before issue | Not advertised |
| AI | Data plate, analyser, dictated reports, lookups | Dynamic job allocation, note summaries |
| Payment plans, interest & bank matching | All three | Not advertised |
| CIS & VAT reverse charge | Both | Not advertised |
| Public booking page | Slot holds, standby list, gap filler | Not advertised |
| Subcontractor / partner network | Offers, portal, payouts, evidence pack | Not advertised |
| Customers on the platform | Newer, smaller | They win7,000+ UK contractors |
| Onboarding | Free migration, no setup fee | Implementation via sales |
How this page was written
Source: joblogic.com · 31 Aug 2026Every claim about Joblogic comes from their own website as it stood on 31 August 2026. We have not tested their product, so where their site is silent we've written “not advertised” rather than claiming they can't do it — on a platform this large it may well exist.
Contract length is described as typical rather than universal; confirm your own terms with them. If anything here is out of date, email support@onpointbusiness.co.uk and we'll correct it.
Straight answers
Including the ones where the answer isn't us.
01Is Joblogic a fair comparison for a small firm?
Only partly. Joblogic is built for multi-site, asset-based compliance work at scale, and it does that well. A five-person gas and electrical round is a different business, and the commitment and price reflect the market it's aimed at.
02How long is the Joblogic contract?
Typically 24 to 36 months, billed annually — confirm your own terms with them. OnPoint has no minimum term and bills monthly, so leaving is a decision you can make in any month rather than one you make once.
03Which is cheaper?
OnPoint, at every size. Five seats is £55 a month against £225 on Joblogic Standard, and ten is £100 against £450. Over a 24-month term that's £5,400 committed at five seats before the first month is worked; OnPoint commits nothing.
04Does OnPoint do planned maintenance contracts?
No. OnPoint tracks certificate renewals per property and chases them automatically, but it doesn't run PPM contracts or multi-site asset schedules. If that's your work, Joblogic is built for it and OnPoint isn't.
05Which handles certificates in more depth?
OnPoint publishes all 39 types by name and validates them against 67 rules before issue. Joblogic advertises “most major gas and electrical surveys” without listing the range, so check on a demo that the specific documents you issue are covered — and note they also cover AC, chiller and water hygiene, which OnPoint doesn't.
06Can I move my data across?
Yes, and migration help is free with no onboarding fee — but check where you are in your current term first. Email support@onpointbusiness.co.uk or call +44 7884 697405 and we'll talk it through.
Try it for a month before you commit to three years.
14 days free, no card, no contract afterwards either. If you run planned maintenance across many sites, Joblogic is the better fit and we'd say so on a call.